Some customers came to us or posting a negative review about BBDINO mold housing kit, complaining about the leaking out issues when they use the housing kit.
First of all, we hope all customers can read the user manual carefully before use, and watch this video as well.
As you see the housing kit is like Lego blocks, but there is no bottom when we creating a mold box.
So we need some thing to hold the "box" and also seals well with the "box"
check what all we have in the kit
The clips for for holding the blocks tight with each other, some customer also say the clips are small and hard to clip, the reason we choose the size of the clips is not for saving money, it's because this size is the best to hold the block the tightest after hundreds of tests.
The double-size tape is to stick the "box" with some materials we use for as the box bottom, for example, if we use a plate as the bottom, and we don't have a hot glue gun in hand, then we can use the double-side tape (remember is for your first several time use only), the best solution is have hot glue gun. make sure the box is firmly sticked together with the bottom (whatever we use) this part is the key to avoid silicone leaking out, cause most of leaking out happens here.
Check our video again for details, and ask us any questions if you are not sure.
Don't rush to make a mold, we are the very one who don't want you to lost / waste silicones 😭😭😭
We are here, don't hesitate to reach us at any time
@ email: help@bestbuysilicone.com
